Polycrete® SL Comfort
Very soft self levelling polyurethane sports floor
Polycrete® SL Comfort REG 8-10 mm is a very soft combi-elastic sports floor system with excellent bounce and comfort due to the thick rubber matt. The floor offers very high comfort and safety level and is very durable and capable to withstand high mechanical stress. The floor is therefore recommended for sports facilities, schools, dance halls, playgrounds and fitness centers and other areas where chock and sound absorbing properties are required.
- Noise and shock absorbing
- Excellent chemical resistance
- Resist 80°C. water temperatures
- High abrasion resistance
- Seamless and hygienic finish
- Easy to clean and sterilise
- Low maintenance cost
- Low odour during installation.
Polycrete® SL Comfort REG is a coloured smooth floor.
10 - 15 years.
To provide a combi-elastic sports floor with high comfort and safety level. Typical uses are sports facilities, schools, dance halls, playgrounds and fitness centers.
Temperature 10ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.
Polycrete® SL Comfort REG is resistant to temperature cycles up to 90ºC dry heat and 80ºC. wet heat. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.
Polycrete® SL Comfort REG
Very soft self levelling polyurethane sports floor.
| Resistant to |
|Neutral oder |
and VOC free
|Hygienic||Office chair||Fire retardant|
Ulfcar Production Aps
EN 13813 SR-B1,5-AR1-IR4
Fire behavior: Bfl
|System thickness||approx.8-10 mm|
|Fire class according to EN 13501-1||BfL-s1|
|Anti-slip according to DIN 51130||R 10|
|VOC according to EN 13419||Pass|
|Abrasion resistance according to EN 660-2 = 1999||Group P|
|Chemical resistance||See Ulfcar® Polycrete Resistance Scheme|
|Physiologically harmless (DIN EN 71 part 3)||Pass|
|Decline after static depression according to EN 433: 1994||0.08 mm|
|Resistance to office wheel wheels according to EN 425||No damage|
|Impact resistant ISO 6272||Class I|
|UV Color stability (indoor and outdoor)||Yes|
|Shore DIN 53505||(A) 80|
|Compatible with underfloor heating (*)||Yes|