You are here: Home / lina / Test / Polycrete® / Polycrete® MD

Polycrete® MD

A three component self levelling cementitious polyurethane screed

Polycrete® MD 3-5 mm is ideal for areas, which are subject to heavy mechanical or chemical wear. With high hygienic demands, such as industrial kitchens, bakeries, slaughter houses, dairies, breweries and generally in food industry and other areas.

Case Study


  • Excellent chemical resistance
  • Resist 80°C water temperatures
  • High abrasion resistance
  • Seamless and hygienic finish
  • Easy to clean and sterilise
  • Low maintenance cost
  • Anti slip finish if required
  • Low odour during installation.

Polycrete® MD is a coloured smooth floor.

Life Expectancy:
10 - 20 years.

System datasheet

To provide a medium to heavy duty floor finish with high temperature and chemical resistance. Typical uses are dry process areas with heavy traffic and impact and chemical exposure.

Application conditions:
Temperature 10ºC to 30ºC., best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Temperature Resistance:
Resistance Polycrete® MD is resistant to temperature cycles up to 90ºC dry heat and 80ºC. wet heat. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.


See standard shades available in "Colour" range.

Polycrete® MD is not colour stable and may discolour on ageing especially light colours.

We recommend therefore darker colours such as Brown Beige, Tomato Red, Leaf Green and Stone Grey where this colour change hardly is noticeable. Product functionality will not be influenced by this.

Polycrete® MD
Self levelling cementitious polyurethane screed.

Chemical resistantSmooth-or-Nonslip      Chock        resistant
  Extremely    hard-wearing  Withstands   heavy loadsNeutral oder and VOC free
   Heat     resistanceWatertightColour
Fast curing Hygienic Office chair 
Fire retardant  




Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD

Technical data

Fully cured @ 20°C4 days
Applied thickness3-5 mm
Water PermeabilityNil –Karsten test (impermeable)
Hardness SHORE D 85
Compressive strength59 MPa
Reaction to fire Bfl - s1
Bond strength >1.5 MPa
Temperature resistance up to 80°C at 4 mm
Thermal expansion coefficient <38 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 1.5 W/m·K
Slip resistanceR9 - R13
Food ContactNo contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Industrivej 26, DK 5592 Ejby

 +45 70 21 38 88