You are here: Home / Systems / Acrydur® / Acrydur® Topcoat


Acrydur® Topcoat

3- component acrylic based flooring system


Acrydur® Topcoat is ideal to provide a light to medium duty, easy to clean, chemical resistant floor coating. A non slip finish can be produced by incorporation of aggregates between coats. Typical uses are process, manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic.

Case Study


Benefits:

  • Aestetically pleasing, silkmat surface

  • Nonslip finish if required

  • Seamless and hygienic finish Very good chemical resistance

  • Easy to clean and sterialise

  • Weatherproof & UV resistent

  • Fast installation

  • Curing down to -30°C

  • Low maintenance cost.

Appearance:
Acrydur® Topcoat is a smooth floor with a silkmatt finish.

Life Expectancy:
3 - 5 years.

 

System datasheet


Application:
Acrydur® Topcoat floorings offers light to medium wearability, impact and chemical resistance. Acrydur® Topcoat is easy to clean and maintain in a hygienic condition. Typical areas of use are light trafficed surroundings subjected to heavy foot and pallet truck traffic. The very fast curing of Acrydur® floorings means, that an eventual production stop is minimized while installing the floor.

Application conditions:
Temperature -30ºC to 30ºC, best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Temperature Resistance:
Acrydur® Topcoat is resistant to temperature cycles up to 80ºC. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.


Colours:

Available in a range of standard colours, see specific colourchart.




Acrydur® Topcoat
3- component acrylic based flooring system


Resistant to   chemicalsSmooth-or-  Nonslip   Chock     resistent
Fast curingWatertightColour
          Extremly            hard-wearing   Withstands    heavy-loadsNeutral oder and VOC   free

Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Dfl
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD


Technical data

PropertiesValue 
Fully cured @ 20°C24 hours
Applied thickness0,5 - 1 mm
Water PermeabilityNil – Karsten test (impermeable)
Hardness SHORE D 80
Compressive strength40 MPa
Reaction to fire Dfl-s1
Bond strength >1.5 MPa
Temperature resistance Up to 80°C at 4 mm
Thermal expansion coefficient <40 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 0,4 W/m·K
Slip resistanceR9 – R13
Food ContactNo contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88

 info@ulfcar.com