You are here: Home / Systems / Epofloor® / Epofloor® Compact

Epofloor® Compact

A three pack, solvent free epoxy resin based flooring material

Epofloor® Compact 3 - 5 mm is ideal for industrial areas, which are subject to heavy mechanical and chemical wear, with high hygienic demands. At the same time the floor is easily cleanable and therefore very suitable for industrial production, chemical production, slaughterhouses, food industry, breweries, etc.

Case Study


  • Seamless & hygienic finish
  • Very good chemical resistance
  • Easy to clean & sterilise
  • Low maintenance cost
  • Attractive appearance
  • High abrasion resistance
  • Solvent free; low odour
  • Fast installation.

Epofloor® Compact is a smooth multicoloured floor which can be produced with a matt or glossy finish.

Life Expectancy
10 - 15 years.


System datasheet

To provide a medium to heavy duty, easy to clean, chemical resistant flooring. Smooth finish glossy or matt surface. Typical uses are dry and wet process areas, manufacturing, packaging and warehousing areas subjected to heavy wear and pallet truck traffic.

Temperature Resistance:
Epofloor® Compact is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.


Available in a range of standard mixes, see the "Colour Quartz" range.

Epofloor® Compact
A three pack, solvent free epoxy resin based flooring material

Resistant to chemicals  Smooth-or-  Nonslip    Chock       resistant
     Extremely        hard-wearingWithstands heavy.loadsNeutral oder and VOC free
WatertightColourFast curing
HygienicOffice chairFire retardant

Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl-s1
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD

Technical data

Fully cured @ 20°C7 days
Applied thickness3 - 4 mm
Water PermeabilityNil – Karsten test (impermeable)
Hardness SHORE D 80
Compressive strength40 MPa
Reaction to fire Bfl-s1
Bond strength >1.5 MPa
Temperature resistance Up to 70°C at 4 mm
Thermal expansion coefficient <38 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 0,6 W/m·K
Slip resistanceR9 – R13
Food ContactNo contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Industrivej 26, DK 5592 Ejby

 +45 70 21 38 88