You are here: Home / Systems / Epofloor® / Epofloor® Dustbinder

Epofloor® Dustbinder

A two pack, solvent free waterbased epoxy resin

Epofloor® Dustbinder is ideal as a sealer on concrete floorings and provides a dirt and water resistant and easy to clean surface.

Case Study


  • Good chemical resistance 

  • Easy to clean 

  • Low installation cost 

  • Solvent free; low odour 

  • Fast installation

Epofloor® Dustbinder provides a smooth finish with a glossy surface.

Life Expectancy
1 - 3 years.


System datasheet

To provide a dustbinding sealer on concrete floorings. Epofloor® Dustbinder is diffusions open and is therefore suitable for sealing of newly laid concrete.

Temperature Resistance:
Epofloor® Dustbinder is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.



Epofloor® Dustbinder
A two pack, solvent free waterbased epoxy resin

Fast curingNeutal oder and VOC free


Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl-s1
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD

Technical data

Fully cured @ 20°C7 days
Applied thickness0,2 mm
Water PermeabilityDiffusion open
Hardness SHORE D 80
Compressive strength55 MPa
Reaction to fire Bfl-s1
Bond strength >1.5 MPa
Temperature resistance Up to 70°C at 4 mm
Thermal expansion coefficient <38 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 0,3 W/m·K
Slip resistancen.a.
Food ContactNo contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Industrivej 26, DK 5592 Ejby

 +45 70 21 38 88