You are here: Home / Systems / Epofloor® / Epofloor® Structure

Epofloor® Structure

A three pack, solvent free epoxy resin based flooring material

Epofloor® Structure 6 - 15 mm is ideal for areas, where decorative surfaces are wanted. The floor is very easy to maintain and easily cleanable and makes the working environments presentable. It is being recommended for usage in for instance exhibition rooms, show rooms, shopping rooms and corridor areas, etc.

Case Study


  • Attractive appearance
  • Aestetic and pleasing finish
  • Seamless & clean look
  • Low maintenance cost
  • Solvent free; low odour.

Epofloor® Structure is a decorative floor build up with coloured or natural stones which may be varied as required.

Life Expectancy
10 - 20 years.


System datasheet

Decorative and wear resistant stone floors for receptions, exhibition areas, shops and show rooms. All kind of decorative effects are possible by varying the coloured and natural stone mix. Not recommended for areas exposed to heavy soiling and large physical load.

Temperature Resistance:
Epofloor® Structure is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make the material susceptible to chemical attack and abrasion wear.


Colours Available in a range of standard mixes, see the "Colour Structure" range.

Epofloor® Structure
A three pack, solvent free epoxy resin based flooring material

Resistant to chemicalsSmooth-or- Nonslip     Chock       resistant
   Extremely     hard-wearing Withstands  heavy-loadsNeutral oder and VOC free
WatertightColourFast curing
HygienicOffice chairFire retardant

Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl-s1
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD

Technical data

Properties Value 
Fully cured @ 20°C 7 days
Applied thickness 6 - 15  mm
Water Permeability n.a.
Hardness  SHORE D 80
Compressive strength 40 MPa
Reaction to fire  Bfl-s1
Bond strength  >1.5 MPa
Temperature resistance  Up to 70°C at 4 mm
Thermal expansion coefficient  <38 ppm
Abrasion resistance 50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity < 0,6 W/m·K
Slip resistance R9 – R13
Food Contact No contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Industrivej 26, DK 5592 Ejby

 +45 70 21 38 88