You are here: Home / Systems / Epofloor® / Epofloor® Terrazzo

Epofloor® Terrazzo

A three pack, solvent free epoxy resin based flooring material

Epofloor® Terrazzo 6 - 15 mm is ideal for areas, where massive decorative surfaces are wanted. The floor is very easy to maintain and easily cleanable and makes the working environments presentable. It is being recommended for usage in for instance airport terminals, supermarkets, exhibition rooms, show rooms, etc.

Case Study


  • High impact resistance
  • Seamless and hygienic finish
  • Very good chemical resistance
  • Easy to clean and sterilise
  • Low maintenance cost
  • Attractive appearance
  • High abrasion resistance
  • Solvent free; low odour
  • Fast installation.

Epofloor® Terrazzo is a decorative floor build up with coloured epoxy and natural stones which may be varied as required.

Life Expectancy
More than 20 years.


System datasheet

Decorative and wear resistant terrazzo floors for airport terminals, railway stations, supermarkets, exhibitions areas etc. All kind of decorative effects are possible by varying the the background colour and the stonemix.

Temperature Resistance:
Resistance Epofloor® Terrazzo is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make the material susceptible to chemical attack and abrasion wear.


Available in a range of standard mixes, see the "Colour Terrazzo" range.

Epofloor® Terrazzo
A three pack, solvent free epoxy resin based flooring material

Resistant to chemicalsSmooth-or- Nonslip     Chock       resistant
    Extremely     hard-wearingWithstands heavy-loadsNeutral oder and VOC free
WatertightColourFast curing
HygienicOffice chairFire retardant

Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl-s1
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD

Technical data

Fully cured @ 20°C7 days
Applied thickness6 -15  mm
Water PermeabilityNil – Karsten test (impermeable)
Hardness SHORE D 80
Compressive strength40 MPa
Reaction to fire Bfl-s1
Bond strength >1.5 MPa
Temperature resistance Up to 70°C at 4 mm
Thermal expansion coefficient <38 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 0,6 W/m·K
Slip resistanceR9 – R13
Food ContactNo contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88