You are here: Home / Systems / Epofloor® / Epofloor® Topcoat


Epofloor® Topcoat

A two pack, solvent free epoxy resin based flooring material


Epofloor® Topcoat is ideal to provide a light to medium duty, easy to clean, chemical resistant floor coating. A non slip finish can be produced by incorporation of aggregates between coats. Typical uses are process, manufacturing, packaging and warehousing areas subjected to heavy foot and pallet truck traffic.

Case Study


Benefits:

  • Non slip finish if required.
  • High build, up to 0.25mm each coat
  • Seamless & hygienic finish
  • Good chemical resistance
  • Easy to clean & sterilise
  • Low maintenance cost
  • Attractive appearance
  • High abrasion resistance
  • Solvent free; low odour
  • Fast installation.

Appearance:
Epofloor® Topcoat provides a smooth finish with a glossy surface.

Life Expectancy
3 - 5 years.

 

System datasheet


Application:
To provide a light to medium duty, easy to clean, chemical resistant flooring. Typical uses are dry areas as packaging and warehousing areas subjected to heavy foot and pallet truck traffic.

Temperature Resistance:
Epofloor® Topcoat is resistant to temperature cycles up to 70°C. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.


Colours:

Colours Available in a range of standard colours, see "Colour" range.




Epofloor® Topcoat
A two pack, solvent free epoxy resin based flooring material


Resistant to chemicalsSmooth-or- Nonslip   Chock     resistant
  
   Extremely     hard-wearing Withstands  heavy-loadsNeutral oder and VOC free 
Watertight Colour Fast curing 
Hygienic Office chair  Fire retardant

Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl-s1
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD


Technical data

PropertiesValue 
Fully cured @ 20°C7 days
Applied thickness0,5 mm
Water PermeabilityNil – Karsten test (impermeable)
Hardness SHORE D 80
Compressive strength40 MPa
Reaction to fire Bfl-s1
Bond strength >1.5 MPa
Temperature resistance Up to 70°C at 4 mm
Thermal expansion coefficient <38 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 0,4 W/m·K
Slip resistancen.a.
Food ContactNo contamination

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88

 info@ulfcar.com