ULFCAR® Base SL
Cement-based self-levelling floor filler
Ulfcar® Base SL is ideal for filling and levelling concrete, screed, natural stone, ceramic tiles, metal, wood, mastic asphalt, bricks clinker, etc. before installing final coatings. Ulfcar® Base SL is also suitable as a final cemented flooring when added Ulfcar® Base hardener.
Hydraulic curing - beginning setting after 1/2 hour
Accessible after 2 hours
Ready for application of resin coatings next day (at 5 mm / 18-20°C)
Low maintenance cost
Low installation cost
Applicable in any wanted layer thickness in one operation.
Ulfcar® Base SL can be applied and filled on dry and humid areas, when they are solid and free of dust, dirt, oil, fat, wax and other stripping compounds.
About 5,8 litre of fresh cold water and 25 kg Ulfcar® Base SL, must be mixed into a lump-free, easy-flowing filler.
Processing time at 18-20°C: About 30 minutes. Accessible after about 2 hours. Ready for application after 1 day.
Too fast drying of the new applied layer must be avoided.
Temperature 5°C to 30°C, best 15 to 20°C.
As concrete .
Ulfcar® Base SL appears as a smooth self-levelling cementisious floor.
Ulfcar Production Aps
EN 13813 SR-B1,5-AR1-IR4
Fire behavior: Bfl
|Fully cured @ 20°C||7 days|
|Applied thickness||6 - 12 mm|
|Water Permeability||Nil – Karsten test (impermeable)|
|Hardness||SHORE D 90|
|Compressive strength||55 MPa|
|Reaction to fire||Bfl - s1|
|Bond strength||>1.5 MPa|
|Temperature resistance||up to 130°C at 9 mm|
|Thermal expansion coefficient||<25 ppm|
|Abrasion resistance||50 mg / 1000 cycles (Taber Abrader)|
|Thermal conductivity||< 1.5 W/m·K|
|Slip resistance||R9 – R13|
|Food Contact||No contamination|