You are here: Home / Technical / Applicators guide / Ending af floor


Technical drawings

Ending a floor

 

Ending of Ulfcar floors and application of coves on loose standing walls.

Ending of Ulfcar floors can be done in two different ways:


By sawcutting in the concrete or by mounting an angle iron as an ending point.


Application of coves on loose standing walls must be done by use of an angle iron of 50 x 50 x 2 mm.

This must be mounted in the concrete floor and the cove is to be made on this profile.

The joint between the wall and the angle iron must be filled with an elastic lute.


Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88

 info@ulfcar.com