You are here: Home / Technical / Applicators guide / Installation (low temp.)


Installation at low temperatures


Working with Acrydur® at low temperatures.
In winter or when applying coating in refrigerated rooms the surface of the substrate to be repaired Is often very cold. In extreme situations Acrydur® resins can be applied at temperatures as low as -30 degrees C. The substrate should be prepared in the same way as at normal temperatures. However, it is particulary important to ensure that no ice has formed on the surface. For curing Acrydur® at low temperatures the addition of Acrydur® ACCL is required. First stir Acrydur® ACCL thoroughly into the Acrydur® resins. Only then Acrydur® RC should be added.


W A R N I N G : Acrydur® ACCL and Acrydur®RC must never be bought in direct contact as there is a danger of explosion. Always store and add separately.

Primer
For priming of cold concrete...
Temperature
Degrees C
Acrydur®
ACCL
Acrydur®
RC
Pot life
(min)
Hardening time
(min)
00.551720
-10153545
-20256590
-3035160300
The amount of Acrydur® RC...

 

Wearlayer
For priming of cold concrete...
Temperature
Degrees C
Acrydur®
ACCL
Acrydur®
RC
Pot life
(min)
Hardening time
(min)
00.551720
-10153545
-20256590
-3035160300
The amount of Acrydur® RC...

 

Sealcoat
For priming of cold concrete...
Temperature
Degrees C
Acrydur®
ACCL
Acrydur®
RC
Pot life
(min)
Hardening time
(min)
00.551720
-10153545
-20256590
-3035160300
The amount of Acrydur® RC...

Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88

 info@ulfcar.com