Acrydur catalyst consumption chart
How to cure MMA The curing time of MMA depends of the air/floor temperature.
When the temperature drops, curing time will be prolonged.
Acrydur RC quantuty for Acrydur resins.
| Temperature Degrees C | GRB1 | L2 | L3 | M | N1 | N4 | T1 |
| 5-10 | 6% | 1,5% | 4% | 5% | 4,5% | 4,5% | 1,5% |
| 10-15 | 5% | 1,5% | 3% | 4% | 3,5% | 3% | 1,2% |
| 15-20 | 4% | 1,5% | 3% | 3% | 3,5% | 3% | 1,0% |
| 20-25 | 3% | 1,0% | 2% | 2% | 2% | 2% | 0,6% |
| 25-30 | 3% | 1,0% | 2% | 2% | 2% | 2% | 0,4% |
| 20-35 | 2% | 1,0% | 1,5% | 1% | 1% | 1% | 0,3% |
| 36 degrees C and above call your rep for advice. Do not proceed. | |||||||
Peroxide quantity calculated on used resin. Temperature statements refer to resin-, floor- and air-temperature. NOTE: All values are derived from laboratory tests. Deviations caused by environmental factors might occur. For application below 5 degrees C please refer to seperate datasheet
