You are here: Home / Technical / Specifiers guide / Electronics


Electronics


Electronic like radio and telecommunication equipment is extremely sensitive to static electricity. By installing antistatic or conductive flooring this problem may be eliminated. In other areas like medical/ precision the instruments and equipment are extremely sensitive to dust. As static electricity makes it difficult to remove dust static electricity must be eliminated by installing antistatic or conductive flooring. Standard electrical machinery if properly earthed need not be protected by conductive flooring. Special electrical machinery or equipment for instance computer controlled fork lifts need be protected by antistatic or conductive flooring.


ULFCAR® PREMIUM

ULFCAR® Premium is our strongest alternative in each category. With this, you will achieve the longest lifetime on your floorings, in combination with extremely high chemical and mechanical impact resistance. ULFCAR® Premium floorings are more expensive than our other alternatives to buy, but has often proven to be the most economical solution, if you consider your investment in your floor in costs per year per square meter, instead of regarding only the initial investment. Customers who wants the longest possible lifetime on floorings, should choose ULFCAR® Premium floorings.

Type

Typical areas of use

Benefits

Specifications

ACRYDUR®
Topfloor

Used in areas where durability and dust free surfaces are required, such as workshops, storage areas, etc. Also used in the refurbishment of older Acrydur coverings.

Aestetically pleasing, silkmat surface. Nonslip finish if required. Seamless and hygienic finish. Easy to clean and sterilise. Weatherproof & UV resistant. Fast installation. Curing down to -30o. Low maintenance cost.

Build thickness mm: 2-4
Life expectancy: 3-5 years
Chemical resistance: Very good
Mechanical resistance after 2 hours
Max load: Approx. 40N/mm2
Max. heat resistance: 80oC
Application temperature: -30 - +30

POLYCRETE®
SL

Used in ordinary industrial environments where durability and high chemical and impact resistance is required. The floor is pedestrian friendly, absorbing both shock and sound and is therefore used in dry areas such as laboratories, pedestrian areas, electronics companies, hospitals, etc.

Noise and shock absorbing. Resist 80oC water temperatures. High abrasion resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Low odour during installation.

Build thickness mm: 2-4
Life expectancy: 10-15 years
Chemical resistance: Excellent
Mechanical resistance after 3-5 days
Max load: Approx. 62N/mm2
Max. heat resistance: 80oC
Application temperature: +18 - +30

EPOFLOOR®
Topfloor

Used in areas where ease of cleaning, dust free surfaces and durability are prioritised such as workshops, storage areas, exhibition areas, laboratories, canteens, pedestrian areas and bathing and also changing areas. Also used in the refurbishment of older Epofloor coverings.

Non slip finish if required. High impact resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free, low odour. Fast installation.

Build thickness mm: 2-4
Life expectancy: 10-15 years
Chemical resistance: Very good
Mechanical resistance after 3 days
Max load: Approx. 55N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30


ULFCAR® BASIC

ULFCAR® Basic floorings are quality flooring systems, that will cover the most needs in the different categories. The floors have an expected lifetime at 10-15 years, but you should calculate maintenance costs in the last period of the lifetime. In normal conditions with normal or little aggressive impact, ULFCAR® Basic is your solution.

 

Type

Typical areas of use

Benefits

Specifications

ACRYDUR®
Standard

Used in areas where there is moderate industrial loading such as bakeries, large kitchens, breweries and other general production areas with normal load.

Aestetically pleasing, silkmat surface. Nonslip finish if required. Seamless and hygienic finish. Easy to clean and sterilise. Weatherproof & UV resistant. Fast installation. Curing down to -30o. Low maintenance cost.

Build thickness mm: 3-4
Life expectancy: 10-15 years
Chemical resistance: Very good
Mechanical resistance after 2 hours
Max load: Approx. 40N/mm2
Max. heat resistance: 80oC
Application temperature: -30 - +30

 EPOFLOOR®
Compact

Used in normal industrial environments where durability, impact and chemical resistance are required. The floor is very easy to clean and is therefore chosen in industrial production, the food processing industries, chemical production, etc.

Seamless & hygienic finish. Excellent chemical resistance. Easy to clean & sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Fast installation.

Build thickness mm: 3-5
Life expectancy: 10-15 years
Chemical resistance: Very good
Mechanical resistance after 3 days
Max load: Approx. >55N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30

ULFCAR® Base
MS

A perfect solution in dry industries such as car-, electronic-, paper-, tobacco-, glass production areas. ULFCAR® Base MS offers a very high mechanical and chemical resistance.

High impact resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Non slip finish if required.

Build thickness mm: 12-20
Life expectancy: 10-15 years
Chemical resistance: Good
Mechanical resistance after 3 days
Max load: Approx. >80N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30


ULFCAR® ECONOMY

ULFCAR® Economy floorings are our cheapest alternativ in every category. Customers, who wants low cost flooring solutions that will solve specific problems in a short period of time, normally 1-3 years, choose economy floorings. Here after the floors should be recoated. ULFCAR® Economy is also chosen in production areas, with the need of constant renewal of the production process, leading to constant change in the production lines.

Type

Typical areas of use

Benefits

Specifications

ACRYDUR®
Topcoat

Used in areas which must be dus free and easy to clean, such as warehouses and archives.

Aestetically pleasing, silkmat surface. Nonslip finish if required. Seamless and hygienic finish. Excellent chemical resistance. Easy to clean and sterilise. Weatherproof & UV resistant. Fast installation. Curing down to -30o. Low maintenance cost.

Build thickness mm: <1
Life expectancy: 3-5 years
Chemical resistance: Good
Mechanical resistance after 2 hours
Max load: Approx. 40N/mm2
Max. heat resistance: 80oC
Application temperature: -30 - +30

EPOFLOOR®
Topcoat

Used in areas such as warehouses and archives, which must be dust free and easy to clean.

Non slip finish if required. High build, up to 0.25mm each coat. Seamless & hygienic finish. Excellent chemical resistance. Easy to clean & sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Fast installation

Build thickness mm: <1
Life expectancy: 3-5 years
Chemical resistance: Good
Mechanical resistance after 3 days
Max load: Approx. >36N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30

ULFCAR® Base
SL

Used for levelling existing concrete floors and as an underlay for ULFCAR® synthetic coverings. Can also be used as a final cemented, wearing-surface in, for example, warehouses and factories, where there are no special hygiene requirements.

Hydraulic curing - beginning setting after 1/2 hour. Accessible after 2 hours. Seamless finish. Ready for application of resin coatings next day (at 5 mm/18-20oC). Low maintenance cost. Fast installation. Applicable in any wanted layer thickness in one operation.

Build thickness mm: 3-
Life expectancy: ? years
Chemical resistance: As concrete
Mechanical resistance after 2 hours
Max load: Approx. 45N/mm2
Max. heat resistance: As concrete
Application temperature: +10 - +30


 

 


Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88

 info@ulfcar.com