You are here: Home / Technical / Specifiers guide / Public


Public


Public areas for instance indoor and outdoor car park constructions are exposes to temperature changes caused by weather changes. Furthermore with each car going in and out the car park the various sections of the subfloor construction will move with the passing of the car. Consequently car park coatings must be temperature resistant, flexible and bridge building to be able to follow the movements of the subfloor. Likewise coatings must be impervious to water and chemically resistant to snow melting chemicals, motor oil, petrol, diesel fuel etc. 


Surface Solutions
Ulfcar® supplies surface solutions which fulfil these demands and furthermore is weather resistant and UV resistant which means it will retain colour and appearance for many years. Some systems has the added advantage that installation is fast due to the short curing time (2 hours). Furthermore they form a very strong chemical bondage to the subfloor. It is therefore possible to renovate even heavily trafficked car parks without disturbing traffic flow. For exhibition areas Ulfcar® offers The Ulfcar® flooring systems offer a multitude of possibilities for decoration, colour schemes and design possibilities and at the same time maintaining strong, durable and wear resistant floorings.

ULFCAR® PREMIUM

ULFCAR® Premium is our strongest alternative in each category. With this, you will achieve the longest lifetime on your floorings, in combination with extremely high chemical and mechanical impact resistance. ULFCAR® Premium floorings are more expensive than our other alternatives to buy, but has often proven to be the most economical solution, if you consider your investment in your floor in costs per year per square meter, instead of regarding only the initial investment. Customers who wants the longest possible lifetime on floorings, should choose ULFCAR® Premium floorings.

Type

Typical areas of use

Benefits

Specifications

ACRYDUR®
Bridge

Used in internal and external environments which are exposed to extreme industrial loads. Therefore used on road bridges, loading ramps, decks of ships, car-park floors, indoors in exceptionally tough industrial environments, or in other places where an extremely durable and impact-resistant floor surface is required.

Aestetically pleasing, silkmat surface. Nonslip finish if required. Seamless and hygienic finish. Easy to clean and sterilise. Weatherproof & UV resistant. Fast installation. Curing down to -30o. Low maintenance cost.

Build thickness mm: 6-10
Life expectancy: 10-20 years
Chemical resistance: Very good
Mechanical resistance after 2 hours
Max load: Approx. 40N/mm2
Max. heat resistance: 80oC
Application temperature: -30 - +30

EPOFLOOR®
Terrazzo

Brings new performances to the traditional terrazzo floorings. Due to its massive structure it has excellent cleaning properties and is therefore very suitable in heavy duty surroundings as airports, supermarkets, railway stations. Available in countless colour combinations.

High impact resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free, low odour. Fast installation.

Build thickness mm: 6-15
Life expectancy: 10-15 years
Chemical resistance: Very good
Mechanical resistance after 3 days
Max load: Approx. 80N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30

POLYCRETE®SL

Used in ordinary industrial environments where durability and high chemical and impact resistance is required. The floor is pedestrian friendly, absorbing both shock and sound and is therefore used in dry areas such as laboratories, pedestrian areas, electronics companies, hospitals, etc.

Noise and shock absorbing. Resist 80oC water temperatures. High abrasion resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Low odour during installation.

Build thickness mm: 2-4
Life expectancy: 10-15 years
Chemical resistance: Excellent
Mechanical resistance after 3-5 days
Max load: Approx. 62N/mm2
Max. heat resistance: 80oC
Application temperature: +18 - +30


ULFCAR® BASIC

ULFCAR® Basic floorings are quality flooring systems, that will cover the most needs in the different categories. The floors have an expected lifetime at 10-15 years, but you should calculate maintenance costs in the last period of the lifetime. In normal conditions with normal or little aggressive impact, ULFCAR® Basic is your solution.

Type

Typical areas of use

Benefits

Specifications

ACRYDUR®
Design

Used in areas where easy cleaning and dust free surfaces are required, such as exhibition areas, laboratories, canteens, pedestrian areas and bathing and changing areas.

Aestetically pleasing, silkmat surface. Nonslip finish if required. Seamless and hygienic finish. Easy to clean and sterilise. Weatherproof & UV resistant. Fast installation. Curing down to -30o. Low maintenance cost.

Build thickness mm: 2-4
Life expectancy: 3-5 years
Chemical resistance: Very good
Mechanical resistance after 2 hours
Max load: Approx. 40N/mm2
Max. heat resistance: 80oC
Application temperature: -30 - +30

EPOFLOOR®
Topfloor

Used in areas where ease of cleaning, dust free surfaces and durability are prioritised such as workshops, storage areas, exhibition areas, laboratories, canteens, pedestrian areas and bathing and changing areas. Also used in the refurbishment of older Epofloor coverings.

Non slip finish if required. High impact resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Fast installation.

Build thickness mm: 2-4
Life expectancy: 10-15 years
Chemical resistance: Very good
Mechanical resistance after 3 days
Max load: Approx. >55N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30

EPOFLOOR®
Structure

Used in areas where decorative surfaces ad a presentable working environment are required. Available in countless colour combinations and is therefor popular for exhibition areas, showrooms, shops, entrance areas, etc.

High impact resistance. Seamless and hygienic finish. Easy to clean and sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Non slip finish if required.

Build thickness mm: 6-15
Life expectancy: 10-20 years
Chemical resistance: Good
Mechanical resistance after 3 days
Max load: Approx. >80N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30 


ULFCAR® ECONOMY

ULFCAR® Economy floorings are our cheapest alternativ in every category. Customers, who wants low cost flooring solutions that will solve specific problems in a short period of time, normally 1-3 years, choose economy floorings. Here after the floors should be recoated. ULFCAR® Economy is also chosen in production areas, with the need of constant renewal of the production process, leading to constant change in the production lines.

Type

Typical areas of use

Benefits

Specifications

ACRYDUR®
Topcoat

Used in areas which must be dus free and easy to clean, such as warehouses and archives.

Aestetically pleasing, silkmat surface. Nonslip finish if required. Seamless and hygienic finish. Excellent chemical resistance. Easy to clean and sterilise. Weatherproof & UV resistant. Fast installation. Curing down to -30o. Low maintenance cost.

Build thickness mm: <1
Life expectancy: 3-5 years
Chemical resistance: Good
Mechanical resistance after 2 hours
Max load: Approx. 40N/mm2
Max. heat resistance: 80oC
Application temperature: -30 - +30

EPOFLOOR®
Topcoat

Used in areas such as warehouses and archives, which must be dust free and easy to clean.

Non slip finish if required. High build, up to 0.25mm each coat. Seamless & hygienic finish. Excellent chemical resistance. Easy to clean & sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Fast installation

Build thickness mm: <1
Life expectancy: 3-5 years
Chemical resistance: Good
Mechanical resistance after 3 days
Max load: Approx. >36N/mm2
Max. heat resistance: 70oC
Application temperature: +10 - +30

ULFCAR® Base
MS

A perfect solution i dry industries such as car-, electronic-, paper-, tobacco-, glass production areas. ULFCAR® Base MS offers a very high mechanical and chemical resistance.

High impact resistance. Seamless and hygienic finish, Easy to clean and sterilise. Low maintenance cost. Attractive appearance. High abrasion resistance. Solvent free. Low odour. Non slip finish if required.

Build thickness mm: 12-20
Life expectancy: 10-20 years
Chemical resistance: Good
Mechanical resistance after 3 days
Max load: >80N/mm2
Max. heat resistance: 70o
Application temperature: +10 - +30




Contact us

Please contact us if you have any questions - we are happy to help.

International Headoffice

 Tværvejen 15, DK-5580 Nr. Åby

 +45 70 21 38 88

 info@ulfcar.com