Vous êtes ici: Accueil / SYSTEMES / Polycrete® Industry / Polycrete® TC

Polycrete® TC

A three component cementitious polyurethane topcoat

Polycrete® TC 1-2 mm is ideal for areas, which are subject to low mechanical or chemical wear, where antislip properties are required.

Case Study


  • Excellent chemical resistance
  • Resist 80°C water temperatures
  • High abrasion resistance
  • Seamless and hygienic finish
  • Easy to clean and sterilise
  • Low maintenance cost
  • Anti slip finish if required
  • Low odour during installation.

Polycrete® TC is a coloured smooth thin coat.

Life Expectancy:
3 - 5 years.

System datasheet

To provide a low to medium duty floor finish with normal temperature and chemical resistance. Typical uses are dry process areas with low traffic and impact and chemical exposure.

Application conditions
Temperature 10ºC to 30ºC. best 15 to 25ºC, max. moisture content in the concrete subfloor 5% by weight.

Temperature Resistance
Polycrete® TC is resistant to temperature cycles up to 90ºC dry heat and 80ºC. wet heat. Extended periods at these temperatures and above will make material susceptible to chemical attack and abrasion wear.


See standard shades available in "Colour" range.

Polycrete® TC is not colour stable and may discolour on ageing especially light colours.

We recommend therefore darker colours such as Brown Beige, Tomato Red, Leaf Green and Stone Grey where this colour change hardly is noticeable. Product functionality will not be influenced by this.

Polycrete® TC
A three component cementitious polyurethane topcoat


Resistant to chemicalsSmoot-or-NonslipChock resistance 
Extremely hard-wearingWithstand heavy-loadsNeutral oder and VOC free
WatertightColourFast curing
HygienicOffice chairFire retardant 

Ulfcar Production Aps
Tværvejen 15
DK-5580 Nørre Aaby

EN 13813 SR-B1,5-AR1-IR4
Synthetic resin screed for internal uses

Fire behavior: Bfl
Release of corrosive substances: SR
Water permeability: NPD
Wear resistance: AR1
Bond strength: B1,5
Impact resistance: IR4
Impact sound insulation: NPD
Sound absorption: NPD
Heat insulation: NPD

Technical data

Fully cured @ 20°C3 days
Applied thickness1 - 2 mm
Water PermeabilityNil –Karsten test (impermeable)
Hardness SHORE D 80
Compressive strength50 MPa
Reaction to fire Bfl - s1
Bond strength >1.5 MPa
Temperature resistance up to 80°C at 2 mm
Thermal expansion coefficient <25 ppm
Abrasion resistance50 mg / 1000 cycles (Taber Abrader)
Thermal conductivity< 1.5 W/m·K
Slip resistanceR9-R13
Food ContactNo contamination


Veuillez nous contacter pour toutes questions - nous serons heureux de vous aider.


 Chemin de la Briqueterie 98, 76480 St. Pierre          de Varengeville

 +33 09 54 14 62 53