Vous êtes ici: Accueil / TECHNIQUE / Mise en oeuvre / Finition du sol

Technical drawings

Ending a floor


Ending of Ulfcar floors and application of coves on loose standing walls.

Ending of Ulfcar floors can be done in two different ways:

By sawcutting in the concrete or by mounting an angle iron as an ending point.

Application of coves on loose standing walls must be done by use of an angle iron of 50 x 50 x 2 mm.

This must be mounted in the concrete floor and the cove is to be made on this profile.

The joint between the wall and the angle iron must be filled with an elastic lute.


Veuillez nous contacter pour toutes questions - nous serons heureux de vous aider.


 Chemin de la Briqueterie 98, 76480 St. Pierre          de Varengeville

 +33 09 54 14 62 53